Search found 9 matches

by sloryd66
Mon Oct 08, 2018 2:05 pm
Forum: Configuration and Programming
Topic: navigation
Replies: 127
Views: 18060

Re: navigation

For what it's worth, I successfully installed Navi on my wifes 12 Edge Friday night running 3.10 and using an eBay A9 card....Navipatch worked on that. The only thing that I haven't gotten around to doing is fixing the IPC to say Navigation instead of Compass....once navi is running however, it chan...
by sloryd66
Mon Oct 08, 2018 1:52 pm
Forum: General and Support forum
Topic: Complete failure
Replies: 11
Views: 1330

Re: Complete failure

Do you have the option to right click on the desktop icon and "run as administrator"? I have a couple of programs like Azereus for downloading music that won't load unless I use that method.
by sloryd66
Mon Oct 08, 2018 1:45 pm
Forum: General and Support forum
Topic: Can't retrieve keypad code.
Replies: 3
Views: 643

Re: Can't retrieve keypad code.

I'm very new to Forscan, but I want to add keyless entry to my '14 F150 STX. I looked on the right side behind the kick panel and did not see a sticker. I also tried the two key method with no luck. I took the drivers door panel off and the wire and connector are there. I then hooked up my ELM adap...
by sloryd66
Mon Oct 08, 2018 1:40 pm
Forum: General and Support forum
Topic: Determining SYNC version: None, V1, V2, V3
Replies: 3
Views: 2656

Re: Determining SYNC version: None, V1, V2, V3

Upon first use of ForScan, it asks which Sync version is equipped with your vehicle. The Choices were: None, SYNC v1, SYNC v2, and SYNC v3 There are 0 threads on this forum and other forums determining the difference between these versions. On the Ford Website, there appears to be 4 different versi...
by sloryd66
Mon Oct 08, 2018 12:04 pm
Forum: Adapters & Connection
Topic: No ELM found. Bad adapter?
Replies: 8
Views: 3846

Re: No ELM found. Bad adapter?

Hi all, I bought a modified USB adapter(FTDI FT232RL+PIC 18F2480), but Forscan(2.3.17 beta3 and 2.2.1 beta) always reported "No ELM found." even I tried different FTDI driver versions(2.2.4.0<seller sent this one>/2.10.0.0/2.12.18) and different laptops(Windows 7/64bit and Windows 10/64bit). I trie...
by sloryd66
Thu Oct 04, 2018 2:35 pm
Forum: Configuration and Programming
Topic: Navigation using ELM and Sync 3.8
Replies: 5
Views: 1232

Re: Navigation using ELM and Sync 3.8

Will an A9 SD NAV card work after the master reboot? It should from my understanding...that's the one I just ordered. Cable will arrive today and my card tomorrow so I'm hoping everything goes smoothly. Have the navipatch.png already so it's just a matter of requesting my extended license tonight a...
by sloryd66
Thu Oct 04, 2018 1:29 pm
Forum: Adapters & Connection
Topic: Drivers for an ELM327 for Windows 7 & 10
Replies: 11
Views: 12654

Re: Drivers for an ELM327 for Windows 7 & 10

Try disconnecting the cable, close Forscan, toggle the switch, restart Forscan and reconnect the cable. Some have mentioned that the switches aren't labeled properly as to HS/MS and it will not connect initially if the toggle is in the wrong position....once started, Forscan will tell you when to fl...
by sloryd66
Mon Oct 01, 2018 12:30 pm
Forum: General and Support forum
Topic: Help! ForScan Mileage Increase
Replies: 4
Views: 1323

Re: Help! ForScan Mileage Increase

Did you save a logfile before making those initial changes? Did you try loading your original values back? What exactly did you tweak?? :?: :?: :?:
by sloryd66
Mon Oct 01, 2018 11:59 am
Forum: General and Support forum
Topic: What happened??
Replies: 2
Views: 550

Re: What happened??

I'm new here as well but use VagCom with a Hex-Can cable to access and tweak my Volkswagen which operates much in the same way Forscan does. I would say flipping the switch between MS/HS is a huge no-no. Certain modules use the MS protocol to communicate and others use the HS. You can't perform both...