FORScan forum

been using the vcx nano with forscan for years never had a problem with it , no need to even start vx manager up to use it with forscan , can even leave adaptor choice on auto and it finds it.

make sure indicator is in neutral position as this can effect parking lights causing only one side to work , it may also be a feature of the truck that only the outter road side parking lights come on when parked as the curb side is well the curb side and passing cars arnt going on that side of the ...

I have used this link for a long time. I tried it today and it took me to the main page where you enter the country and language. Then it took me to the regular asbuilt page where you enter the VIN. The next time I used the link it took me directly to the VIN input page. So it is working for me. ht...

As title says looking for some who can still access the ford as built data page to download a asbuilt file for me cheers......

as its all 3 check for a common wiring problem bad earth cut/broken wire etc ,
also what adaptor are you using as it may be that if its not self switiching between high and low can.

i would start by again removing all refrigarant from the system and refilling , as over filling the system will have the same effect as underfilling it and it will NOT work , as you have said you have filled it then filled it again because unknown reason just says u started car and refilled again af...

as long as the chip can be programmed and is been read by the car it will be good to go . the same chip is used for clonging as for normal programming.

1 replace Pcm
2 write as built data to new Pcm
3 get car towed to local ford dealer or get a registered locksmith to come and programm the Pats system making sure you have 2 keys ready to program
4 job done drive happy

you have to clear the my key and reprogram it how u want it at the time of programming

do you have an old saved profile if so load it up , goto the rcm module in the saved profile and get the calibration file name (maybe called stratigy file ), disconnect old profile and then load up new profile ,then get that file from the ford site or if you have it already load it to the new module...