Search found 580 matches

by Andyfocus
Thu May 27, 2021 12:05 am
Forum: Configuration and Programming
Topic: Error code U2100: 00-C6 after installing a new CCM
Replies: 15
Views: 794

Re: Error code U2100: 00-C6 after installing a new CCM

check and make sure any module you have fitted has the correct vin number in it...
by Andyfocus
Tue Apr 20, 2021 10:22 am
Forum: Beta testing
Topic: Method to disable auto stop / start found
Replies: 53
Views: 65427

Re: Method to disable auto stop / start found

since ive had my focus the stop/start has never worked , if you want to do what i did then go to the gearbox on the end behind the 5th gear extension of the gearbox their is a sensor , remove the sensor then remove the cover (will need to be cut off carefully , their is a wavey piece of metal in it ...
by Andyfocus
Sun Apr 18, 2021 10:13 pm
Forum: Beta testing
Topic: Battery percentage charge to more than 80%
Replies: 4
Views: 1551

Re: Battery percentage charge to more than 80%

usual problem from ford , you have to drive around with side lights on or it doesnt charge correctly due to fuel saving via reduced loads on the engine ( disconnects alternator from charging )
by Andyfocus
Tue Feb 16, 2021 11:49 am
Forum: General and Support forum
Topic: Vehicle Focus 1.5 ecoboost lost keys and triggered alarm.
Replies: 1
Views: 163

Re: Vehicle Focus 1.5 ecoboost lost keys and triggered alarm.

you need to have the keys cut before you can program them .
by Andyfocus
Tue Feb 16, 2021 11:48 am
Forum: General and Support forum
Topic: 2018 Ford Everest 3.2 L PATS programming
Replies: 2
Views: 425

Re: 2018 Ford Everest 3.2 L PATS programming

as posted many times , after 2014 its main dealer or authorised locksmiths only
by Andyfocus
Tue Feb 09, 2021 4:48 am
Forum: General and Support forum
Topic: dtc0335
Replies: 5
Views: 367

Re: dtc0335

check the cam shaft sensor too ;) , swop it out for another if you can , maybe one from a working car just to check it , then replace it if that works .

was scratching my head for weeks on a car reporting crank sensor fault , turned out to be the cam shaft one.
by Andyfocus
Fri Feb 05, 2021 8:23 pm
Forum: General and Support forum
Topic: Key codeing
Replies: 1
Views: 212

Re: Key codeing

you will need to take the car to a ford dealer or registered locksmith to add another key if you only have the one key .
by Andyfocus
Tue Jan 26, 2021 7:10 am
Forum: General and Support forum
Topic: No brake lights after using Forscan, 2013 F150
Replies: 5
Views: 350

Re: No brake lights after using Forscan, 2013 F150

goto the ford site put in your registration or vin number and you can get the original as built file for the car .
by Andyfocus
Sun Jan 17, 2021 5:03 pm
Forum: Configuration and Programming
Topic: PCM AsBuilt data
Replies: 1
Views: 276

Re: PCM AsBuilt data

no it does not,,