Search found 585 matches

by Andyfocus
Mon Aug 02, 2021 3:51 pm
Forum: Configuration and Programming
Topic: How to backup the BCM Car Configuration?!
Replies: 3
Views: 44

Re: How to backup the BCM Car Configuration?!

if its a 2017 model you can back up the instrusment cluster but it will do you no good as you cant program the keys or reset the PATS its dealer or authorised locksmiths only , no idea why you would want to back up the BCM for a IPC swop ??
by Andyfocus
Tue Jul 20, 2021 4:12 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: HEEEEELP!!!!!!
Replies: 2
Views: 159

Re: HEEEEELP!!!!!!

try new fuel , if the car was stood for awhile...
by Andyfocus
Tue Jul 06, 2021 8:53 am
Forum: General and Support forum
Topic: Asbuilt data
Replies: 3
Views: 218

Re: Asbuilt data

Hi can somebody please tell me how you read the asbuilt data, once you have downloaded it from motorcraft. you can open it with any text reader .note pad etc if you dont want to have to open forscan and run it , if you are just wanting to read a few lines of code or match it against what ever is wr...
by Andyfocus
Sat Jul 03, 2021 1:48 am
Forum: Configuration and Programming
Topic: 1997 F150 Replacement ECM - Sync the Modules?
Replies: 17
Views: 562

Re: 1997 F150 Replacement ECM - Sync the Modules?

ok if it came pre-programmed with your vin then ignore what i wrote lol , sorry didnt know it was pre-programmed. run threw the pat programming anyway to match serieral number for the unit to sync with the other modules ,? make sure you have 2 keys and one is not a clone. i know on the orignal ford ...
by Andyfocus
Thu Jul 01, 2021 8:23 pm
Forum: Configuration and Programming
Topic: 1997 F150 Replacement ECM - Sync the Modules?
Replies: 17
Views: 562

Re: 1997 F150 Replacement ECM - Sync the Modules?

the module will require programming with your vin ( if pats is removed then this is 50/5- if required ) , it will also need programming with your as built data , when this is done the pats should then be programmed if required still ?.
by Andyfocus
Thu May 27, 2021 12:05 am
Forum: Configuration and Programming
Topic: Error code U2100: 00-C6 after installing a new CCM
Replies: 15
Views: 941

Re: Error code U2100: 00-C6 after installing a new CCM

check and make sure any module you have fitted has the correct vin number in it...
by Andyfocus
Tue Apr 20, 2021 10:22 am
Forum: Beta testing
Topic: Method to disable auto stop / start found
Replies: 54
Views: 67575

Re: Method to disable auto stop / start found

since ive had my focus the stop/start has never worked , if you want to do what i did then go to the gearbox on the end behind the 5th gear extension of the gearbox their is a sensor , remove the sensor then remove the cover (will need to be cut off carefully , their is a wavey piece of metal in it ...
by Andyfocus
Sun Apr 18, 2021 10:13 pm
Forum: Beta testing
Topic: Battery percentage charge to more than 80%
Replies: 5
Views: 1848

Re: Battery percentage charge to more than 80%

usual problem from ford , you have to drive around with side lights on or it doesnt charge correctly due to fuel saving via reduced loads on the engine ( disconnects alternator from charging )
by Andyfocus
Tue Feb 16, 2021 11:49 am
Forum: General and Support forum
Topic: Vehicle Focus 1.5 ecoboost lost keys and triggered alarm.
Replies: 1
Views: 178

Re: Vehicle Focus 1.5 ecoboost lost keys and triggered alarm.

you need to have the keys cut before you can program them .