Search found 747 matches

by Andyfocus
Tue Jul 18, 2023 5:48 pm
Forum: General and Support forum
Topic: Hardware ID mismatch
Replies: 4
Views: 1772

Re: Hardware ID mismatch

license key and computer dont match one has cap C the other is normal c.
by Andyfocus
Tue Jul 18, 2023 5:43 pm
Forum: Configuration and Programming
Topic: Fixed Led headlamps lhd rhd
Replies: 2
Views: 867

Re: Fixed Led headlamps lhd rhd

no it is not forscn programmable, you either have to buy the tape that fits on the head light to make it a level pattern or if ur lucky the headlights have a slide to move accross to make it left or right hand drive ,(2nd option is not very common nowadays ,so it probably wont have it ), 3rd option ...
by Andyfocus
Thu May 11, 2023 1:10 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: 2015 Transit brake pad wear indicator
Replies: 3
Views: 745

Re: 2015 Transit brake pad wear

seperate the wires , they should not be touching each other to turn the light off .you can then change the setting back to brake wear sensors fitted if you wish. if you have a multi meter check at the ends to make sure their is no short between any of the wires still.
by Andyfocus
Wed May 10, 2023 3:24 am
Forum: General and Support forum
Topic: Ford IDS
Replies: 4
Views: 1280

Re: Ford IDS

also works with vcx nano for ford and mazda ;)
by Andyfocus
Thu Apr 27, 2023 8:32 pm
Forum: General and Support forum
Topic: unable to change interface
Replies: 6
Views: 738

Re: unable to change interface

you have to manually change adaptors in the options , it will give you a list if you have had a few different ones plugged in , once the new adaptor is plugged in start forscan and goto options and adaptor options to select the new adaptor.
by Andyfocus
Mon Apr 24, 2023 2:04 am
Forum: Configuration and Programming
Topic: 12" Digital Cluster Swap from Escape to Maverick
Replies: 5
Views: 515

Re: 12" Digital Cluster Swap from Escape to Maverick

did you save the original as build that the cluster came with ? it might be worth putting it back on and only changing the first 2 lines of code which should be the vin , if you have the original do this and then check to see if the orignal had the option to change from metric to imperial in the opt...
by Andyfocus
Tue Apr 18, 2023 2:53 pm
Forum: Configuration and Programming
Topic: calibration
Replies: 13
Views: 1160

Re: calibration

park car on a flat level surface open forscan go to calibrate longtitudinal and lateral sensors ,when complete job done .cant remember off hand if it in the RCM or ABS section , if i remember correctly it depends on the model of car as it changes .in a focus it in the RCM but when someone else had t...
by Andyfocus
Tue Apr 18, 2023 2:38 pm
Forum: General and Support forum
Topic: Buying new laptop/adaptor
Replies: 2
Views: 454

Re: Buying new laptop/adaptor

you will need to contact support when you have installed forscan on the new machines with the new code that forscan generates so they can switch it over to the new machine.
by Andyfocus
Sun Jan 08, 2023 2:00 am
Forum: Configuration and Programming
Topic: ***2016 Ford F250 PATS/MyKey delete & program***
Replies: 7
Views: 1256

Re: ***2016 Ford F250 PATS/MyKey delete & program***

if you can find someone with an autel programmer then they can do it but forscan can not do anything after around 2014. Yea...I'm thinking I gotta go to a locksmith or Ford Stealership to have it done. Was just hoping I could with ForScan. anyone with an autel can do it as long as you havent change...
by Andyfocus
Tue Jan 03, 2023 1:58 am
Forum: Configuration and Programming
Topic: ***2016 Ford F250 PATS/MyKey delete & program***
Replies: 7
Views: 1256

Re: ***2016 Ford F250 PATS/MyKey delete & program***

if you can find someone with an autel programmer then they can do it but forscan can not do anything after around 2014.