Search found 247 matches

by omar302
Fri Jul 16, 2021 4:53 pm
Forum: Configuration and Programming
Topic: Instrument cluster swap US to EU - mileage setting ?
Replies: 2
Views: 60

Re: Instrument cluster swap US to EU - mileage setting ?

The cluster will show the value that it had from the previous vehicle. It will not change mileage automatically, neither higher or lower. ForScan can usually allow you to "increase" the mileage manually. So you have to buy a cluster with less mileage than yours so you can then increase it ...
by omar302
Mon Jul 12, 2021 5:04 am
Forum: General and Support forum
Topic: 2021 Ford Explorer
Replies: 1
Views: 84

Re: 2021 Ford Explorer

I suggest to check the Explorer forums, they have a thread on 2020+ ForScan mods:

https://www.explorerforum.com/forums/th ... on.481800/
by omar302
Tue Jul 06, 2021 10:32 am
Forum: Configuration and Programming
Topic: Lock car when engine is running
Replies: 8
Views: 270

Re: Lock car when engine is running

So with your vehicle, the keyfob (remote) lock button will not work when you leave the engine running?
by omar302
Tue Jul 06, 2021 10:12 am
Forum: Configuration and Programming
Topic: Lock car when engine is running
Replies: 8
Views: 270

Re: Lock car when engine is running

US Ford vehicles can be locked by using the keypad on the door or by the remote fob. But you cannot use the door lock key from inside the vehicle. I guess you didn't understand my request properly. Here is a situation I would like to have: I drive the car, come to a place, stop the car but keep the...
by omar302
Tue Jul 06, 2021 8:51 am
Forum: Configuration and Programming
Topic: Lock car when engine is running
Replies: 8
Views: 270

Re: Lock car when engine is running

US Ford vehicles can be locked by using the keypad on the door or by the remote fob. But you cannot use the door lock key from inside the vehicle.
by omar302
Tue Jul 06, 2021 8:48 am
Forum: Configuration and Programming
Topic: Lost heated/cooled seat functionality after Sync3 upgrade
Replies: 5
Views: 401

Re: Lost heated/cooled seat functionality after Sync3 upgrade

There is no thanks button, so i wanted to thank you for updating the issue as it would surely help others in the future.
by omar302
Thu Jun 24, 2021 11:02 am
Forum: Configuration and Programming
Topic: Head lamp timer when truck is off
Replies: 1
Views: 51

Re: Head lamp timer when truck is off

The 15-20 minutes you are seeing should be the battery saver kicking in. There is no adjustment to that, as far as I know. But, if you have "Autolamps", there should be a setting in the instrument cluster "Autolamp delay", this setting will keep headlight on for the set period if...
by omar302
Tue Jun 22, 2021 6:50 am
Forum: Configuration and Programming
Topic: PCM Configuration to Show Current Gear?
Replies: 0
Views: 93

PCM Configuration to Show Current Gear?

@FORScan Hi, can the PCM configuration allow to always show the current gear in the IPC at all times? I have a 2016 Ford Edge (NA) and the PCM configuration only shows the Active Torque Coupling configuration. Noticed in this Post (https://forscan.org/forum/viewtopic.php?f=16&t=18722) that a mem...
by omar302
Sat Jun 19, 2021 6:54 am
Forum: Configuration and Programming
Topic: UpGrade XLT Cluster to Lariat Cluster
Replies: 1
Views: 99

Re: UpGrade XLT Cluster to Lariat Cluster

For the right steering switch, you probably need to update the As Built Data for the SCCM module. Search for a Ranger with similar equipment and try using its ABD for the SCCM.

For the miles, contact the ForScan and may they can enable the function to increase the odometer reading.