Search found 162 matches
- Sun Jul 12, 2020 4:56 am
- Forum: Beta testing
- Topic: How will we know when a new version is released?
- Replies: 1
- Views: 50
Re: How will we know when a new version is released?
Go to the ForScan Main Page. https://forscan.org/
- Wed Jul 08, 2020 11:18 am
- Forum: General and Support forum
- Topic: HID disable short period for Flash to Pass?
- Replies: 1
- Views: 1364
Re: HID disable short period for Flash to Pass?
Raising this issue from the past, now the same is also present in my 2016 Edge with HID. Anyone can help?
- Wed Jul 08, 2020 4:57 am
- Forum: Configuration and Programming
- Topic: Routing door and startup chime through speakers?
- Replies: 7
- Views: 2358
Re: Routing door and startup chime through speakers?
I think the dual chime is to chime from the IPC if the ACM is not powered up/ready. I am still interested in doing this mod, however I think I will have to hard wire it instead to the center speaker or patch it into the APIM output. My 2016 Edge also has it set as 720-01-01 xxxx xxx4 from the facto...
- Mon Jul 06, 2020 6:28 pm
- Forum: Configuration and Programming
- Topic: 2016 Explorer Spreadsheet
- Replies: 1
- Views: 85
Re: 2016 Explorer Spreadsheet
Here is the new link:
https://www.icloud.com/numbers/0yl-Fqa3 ... er_11-20MY
https://www.icloud.com/numbers/0yl-Fqa3 ... er_11-20MY
- Fri Jun 26, 2020 2:38 am
- Forum: Configuration and Programming
- Topic: FORD EDGE 2016 TITANIUM PERIMETER PLUS DONT WORKS!
- Replies: 3
- Views: 142
Re: FORD EDGE 2016 TITANIUM PERIMETER PLUS DONT WORKS!
eBay too. Found a very good deal on one. It been more than a year.
- Wed Jun 24, 2020 5:23 am
- Forum: Configuration and Programming
- Topic: FORD EDGE 2016 TITANIUM PERIMETER PLUS DONT WORKS!
- Replies: 3
- Views: 142
Re: FORD EDGE 2016 TITANIUM PERIMETER PLUS DONT WORKS!
I had installed FT4Z-19A361-A on my 2016 Edge Sport. It worked without any programming. But the the shock sensor, in my opinion, is weak. Even set at the highest setting it needs a very strong blow for it to activate! I zip tied the module to the exact location as per the instructions. I noticed fro...
- Wed Jun 24, 2020 4:35 am
- Forum: Beta testing
- Topic: Please HELP, ABS module messed up after Firmware update
- Replies: 6
- Views: 246
Re: Please HELP, ABS module messed up after Firmware update
I am not an expert, it is better if you direct message the ForScan team if they can help. These are my ideas: Did the flash process go smooth or did it fail at any file? If it failed at a file, try re-flashing without the failed file and then flash only the failed file after the others finish. Also,...
- Fri Jun 19, 2020 7:49 am
- Forum: Configuration and Programming
- Topic: 2019 Ford Edge Spreadsheet
- Replies: 6
- Views: 1271
Re: 2019 Ford Edge Spreadsheet
This is the latest link. https://www.icloud.com/numbers/0yl-Fqa3Gnjh8m0K-1vadEHiA#FORScan_Ford_Explorer_11-20MY For the 2015-2020 Edge, you'll follow the 2016-2019 Explorer. 2020 Edge is NOT similar to the 2020 Explorer. For Sync, follow what you have. Sync 2 or Sync 3. Also remember that it is not ...
- Wed Jun 17, 2020 6:10 am
- Forum: Configuration and Programming
- Topic: Secure idle 2015MKX
- Replies: 4
- Views: 239
Re: Secure idle 2015MKX
As far as I know, the Flex is similar to the 2015 and earlier MKX and Ford Explorer. No Secure Idle available for them.
- Sun Jun 14, 2020 4:39 am
- Forum: Diagnostics and Maintenance using FORScan
- Topic: 2016 Explorer LED signature light - only one on with ignition on
- Replies: 4
- Views: 124
Re: 2016 Explorer LED signature light - only one on with ignition on
I don't recall any ForScan edit that would affect only one side. To be sure, just return the BCM module to stock and see if it fixes it. Also, I am not sure, if there is a lighting module, change it to stock values to check. Thanks but reverting BCM to the original settings did not help. Also, I co...