Unable to Identify Vehicle - Please Contact Developers

Discussion about adapters and connections - usage, problems, solutions

Unable to Identify Vehicle - Please Contact Developers

Postby FORZDA2 » Fri Apr 13, 2018 10:49 pm

When I try to connect the ELM to vehicle (2018 Ford F150 Raptor), I get the attached message. My laptop FORScan connects to the ELM, but then says it can't read the vehicle and says to contact the developers. I'm guessing my vehicle software is a newer version? Please help...

Thanks!

FORScanNotConnected.PNG
FORScanNotConnected.PNG (63.73 KiB) Viewed 415 times
`18 Ford F-150 Raptor, Lightning Blue = The Super/Fun... Truck!
`17 Ford Focus RS, Nitrous Blue = The Super/Fun Car
User avatar
FORZDA2
 
Posts: 4
Joined: Wed Dec 06, 2017 7:13 pm
Location: Virginia USA
Vehicle: Focus RS, GTDI, 2.3L, 2017

Re: Unable to Identify Vehicle - Please Contact Developers

Postby f-wolf » Mon Apr 16, 2018 5:45 am

Make sure all is right in:

Configuration

FORScanNotConnected.png
FORScanNotConnected.png (62.43 KiB) Viewed 381 times


And if you got an ELM with the switch...switch must be on HS to start with.
f-wolf
 
Posts: 95
Joined: Sat Apr 18, 2015 12:41 am
Vehicle: Ford XR6 Turbo BA MK II 6 Speed Manual

Re: Unable to Identify Vehicle - Please Contact Developers

Postby FORZDA2 » Mon Apr 16, 2018 3:27 pm

I've reviewed the Configuration and the HS/MS switch position and tried all combinations. I may have the problem because the PCM/TCM has an aftermarket "tune" in it? I'll need to flash back to OEM and try again. Thanks for the input!
`18 Ford F-150 Raptor, Lightning Blue = The Super/Fun... Truck!
`17 Ford Focus RS, Nitrous Blue = The Super/Fun Car
User avatar
FORZDA2
 
Posts: 4
Joined: Wed Dec 06, 2017 7:13 pm
Location: Virginia USA
Vehicle: Focus RS, GTDI, 2.3L, 2017

Re: Unable to Identify Vehicle - Please Contact Developers

Postby FORZDA2 » Tue Apr 17, 2018 2:11 pm

Flashed back to stock and still no joy on connecting to the vehicle. Looks like I'll just try another ELM device...
`18 Ford F-150 Raptor, Lightning Blue = The Super/Fun... Truck!
`17 Ford Focus RS, Nitrous Blue = The Super/Fun Car
User avatar
FORZDA2
 
Posts: 4
Joined: Wed Dec 06, 2017 7:13 pm
Location: Virginia USA
Vehicle: Focus RS, GTDI, 2.3L, 2017

Re: Unable to Identify Vehicle - Please Contact Developers

Postby Matt1295 » Tue May 01, 2018 7:37 pm

Im having this issue did u find a way to solve it

Thanks matt
Matt1295
 
Posts: 23
Joined: Mon Mar 23, 2015 8:40 am
Vehicle: 2014 fiesta Ecoboost

Re: Unable to Identify Vehicle - Please Contact Developers

Postby Golfman454ss88 » Thu May 03, 2018 10:16 pm

Make sure you have the latest version of forscan, 2.3.14
Golfman454ss88
 
Posts: 11
Joined: Wed Dec 21, 2016 12:01 pm
Vehicle: 2018 Escape se, Shadow Black

Re: Unable to Identify Vehicle - Please Contact Developers

Postby capri v8 driver » Wed May 09, 2018 6:53 pm

Hello everyone.

I tried last night to connect with Forscan 2.3.14 to my jaguar s type 3.0 v6 from 2000 but no success.

I get an message like "can not identify car in to database".

ELM327 interface is ok, is green on Forscan. Tried with the switch in the ms and hs positions.

Is there any software version that will support a 1999/2001 Jaguar S Type ? Its exactly the same as a Lincoln LS 3.0 v6 1999/2001. They both share the same ecu, loom, and all the other hardware.

I have to re-program the control modules and turn some stuff off like the airbags and seat module as I re-used almost everything from a jaguar S type and build into a '69 Ford Taunus 20m and the airbags and seat module are no longer used.

Thank you so much in advance.

Regards
capri v8 driver
 
Posts: 1
Joined: Wed May 09, 2018 2:11 pm
Vehicle: jaguar s type 3.0 v6 2000


Return to Adapters & Connection

Who is online

Users browsing this forum: No registered users and 3 guests