Performance fix of china ELM327 WiFi adapter

Discussion about adapters and connections - usage, problems, solutions

Re: Performance fix of china ELM327 WiFi adapter

Postby Gasman » Sat Nov 11, 2017 3:22 pm

I’ve got the elm 327 v1.5 Wi-fi and it connects to FORScan then won’t load vehicle details , even bought another elm unit to see if that would identify vehicle (which is a 2007 ford transit t280) , annoying as I had a previous elm 327 which I lost a while back and these recent two replacements both suffer same issue . Any ideas guys?
Posts: 10
Joined: Sat Dec 31, 2016 11:07 am
Vehicle: Transit fwd 2.2 85 2008

Re: Performance fix of china ELM327 WiFi adapter

Postby jaron2015 » Sat May 12, 2018 3:39 pm

I recently bought a WiFi OBD2 off Amazon from Mestart and it connects fine but will not read vehicle. Just says error please turn vehicle on. I’ve tried to type the correct IP on a web browser and still no luck there either. Anyone purchased one from Mestart and had any luck?
Posts: 1
Joined: Sat May 12, 2018 2:42 am
Vehicle: Ford F-150 Sport 5.0 7,500/385HP 2016

Re: Performance fix of china ELM327 WiFi adapter

Postby aleaFS » Tue May 22, 2018 9:59 pm

Hi, recently i buy a Vgate Pro WIFI with chip v2.1, Forscan say that 60 ms is bad, but it run very fast in opposite with my old obd2 v1.5.

Alone a problem, it doesn't has web page to encrypt communication by wifi, i try the iweb.asp and others without positive results.

Any idea before that i try change it by command AT?

Posts: 1
Joined: Tue May 03, 2016 11:15 am
Vehicle: Mazda CX7 CRDI 173CV 2010


Return to Adapters & Connection

Who is online

Users browsing this forum: No registered users and 4 guests