Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Share your FORScan experience with other users

Re: Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Postby FORScan » Fri Sep 11, 2015 3:42 am

Do you have P242F DTC?

Also, as found recently, on some vehicles regeneration may not start if EGT temperature is out of bounds. So it is recommended to warm engine up and let it idle for at least 30 seconds right before the regen.
FORScan
Site Admin
 
Posts: 2468
Joined: Fri Jun 13, 2014 2:21 am

Re: Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Postby drschlaumeier » Thu Nov 05, 2015 2:19 pm

uhh, long time that I did not have look into this forum.
I got some PM but I cannot answer since its not enabled by admin.

However, Forscan admin asked me to give permission to translate my description into russian language ... yes, no problem.

Another user asked me if I solved the problem with my EGR. Yes, since I cleaned the mechanics (you have to disassemble the entire EGR), I have next 20.000 km without any problem. My Mazda is running like hell :-)

Rgds
drschlaumeier
 
Posts: 4
Joined: Sun Aug 31, 2014 7:15 am
Vehicle: Mazda 6 GY, Facelift

Re: Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Postby Twiggy5255 » Mon Jun 13, 2016 1:10 am

Hi all,
I have recieved the two codes P242f and P2458 I deleted codes via 'maf' trick. I carried out a static regeneration twice but each time towards the end of regeneration the codes would up again? The DPF idleing at 1kpa. What would resseting DPF learned values achieve? Also what kpa should the EGR run at?
Cheers Twiggy
Twiggy5255
 
Posts: 2
Joined: Sun Jun 12, 2016 8:54 pm
Vehicle: focus rs mk2

Re: Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Postby manuelbruces » Tue Dec 06, 2016 7:59 pm

I have the same problem with my mazda 3 2.0 mzr-cd 2008
Says contact developers on trial and regeneration dpf
manuelbruces
 
Posts: 2
Joined: Sun Nov 13, 2016 12:02 pm
Vehicle: Mazda 3 crtd 2.0 143 cv 2008

Re: Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Postby mstrain » Fri Jun 16, 2017 6:09 am

I have the same problem with my mk3,thanks for share
mstrain
 
Posts: 3
Joined: Tue Jun 13, 2017 4:02 pm
Vehicle: Ford Focus,China,1.6L,2017

Re: Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Postby marcabrus » Fri Aug 25, 2017 8:28 pm

EllwoodJT wrote:Hi I'm having a problem running the static regeneration part of the software. I can get pretty much all functions but it won't do a test on demand with the engine running but more importantly it won't let me do a static regeneration of the particulate filter, it says 'service procedure stopped, contact the developer'.... Is this a function that only comes with a paid version? I'm using Windows 7 and an Elm 327 cable off eBay. Ford focus 1.6 duratorq 2009. I've recently re filled the additive tank and changed the fuel and air filters. Thank you in advance. Ellwood

i had the same problem. with same car. someone told me he resolved unplugging some tubes goind to differential pression sensor, going arounn with the car for a while, plug everything and retry. for me i thought was too risky so a bought a regenerated one filter
marcabrus
 
Posts: 2
Joined: Thu Jul 27, 2017 10:11 am
Vehicle: ford focus II

Re: Cleaning clogged DPF on Ford Focus II 1.6 TDCI

Postby focus_dd » Sat Aug 26, 2017 4:36 pm

Hello,
I have the same problem with the focus (1.6 TDCI MK2) from my girl friend, if I want execute the static regeneration: forscan says 'service procedure stopped, contact the developer'.
Is there a solution available?

regards
Norbert
focus_dd
 
Posts: 1
Joined: Sat Aug 26, 2017 12:33 pm
Vehicle: FORD FOCUS MK2 KOMBI (DA3) 1.6 TDCI 109PS

Previous

Return to Diagnostics and Maintenance using FORScan

Who is online

Users browsing this forum: Google [Bot] and 6 guests