+ Service function "Injector calibration" for:
Mazda 6 2.0 RF-T 2002-2004 model year
Mazda MPV 2.0 RF-T 2002-2004 model year
Mazda 5 2.0 RF-T 2007 model year
Mazda Bongo 2.0 RF-T 2007 model year
This service function needs to be tested on 2.0 RF-T 2007 model year. As for RF-T 2002-2004 model year - it was tested, found a problem for china ELM327 bluetooth adapters: because of PCM protocol specific, significant response time of china ELM327 bluetooth adapters may cause loss of connection to PCM. We have applied a fix/improvement for this case, but had no chance to test it (user who addressed the problem is out of city for 2 weeks).
+ Service fuction "Read Fuel Injector Correction Factors", "Change Fuel Injector Correction Factors" for:
Mazda BT-50 2.5 WL-CD/3.0 WE-CD 2007 model year
Ford Ranger/Everest/Endeavour 2.5 WL-CD/3.0 WE-CD 2007 model year
This function was not tested on a real vehicle (user who requested the function had no chance to check it). However, the function is very similar to other Mazda so we don't expect any problems here.
+ Service procedure "ABS service bleed" for vehicles with ESP:
Mondeo Mk4 2007-2011 model year
Galaxy/S-Max 2006-2010 model year
Fiesta Mk7 2008-2011 model year
Fiesta Mk7 with ABS Mk60 2013 model year
Focus/C-Max Mk3 2011 model year
Kuga 2013 model year
B-Max with ABS Mk60 2012 model year
Transit Connect / Tourneo Connect 2009 model year
Transit Connect 2014 model year
EcoSport 2014 model year
This function was thoroughly tested only on Fiesta Mk7 and Focus Mk3. On Fiesta Mk7 user who replaced the brake fluid complained that the flud didn't penetrate to ABS pump until he pressed the brake pedal (although the procedure instructs to do not touch pedal). We are not sure if this a local problem with the procedure or model specific. On Focus Mk3 the procedure was executed just fine. For other models it should be executed carefully.
+ Service procedures "DPF Static Regeneration", "Reset the Diesel Particulate Filter Learned Values", "Reset Differential Pressure Sensor Learned Values" for:
Mondeo Mk4 2.2 TDCi (Euro V) 2011 model year
Galaxy/S-Max 2.2 TDCi (Euro V) 2010 model year
Focus/C-Max Mk3 2.0 TDCi 2011 model year
This procedure was tested on Mondeo Mk4 2011, the problem is that for some reason the procedure won't start on this vehicle with error code "incorrect vehicle conditions". The procedure was thoroughly reviewed several times, found no problems - the procedure seems to be correct. Need tests on other vehicles with this type of PCM.