2012 Ford Edge - Rear Camera - No Guidelines

Any issues related to FORScan application

2012 Ford Edge - Rear Camera - No Guidelines

Postby bdshan » Wed Sep 06, 2017 12:13 am

My rear camera died so I replaced it with: BT4Z19G490B

The camera works, but I am unable to calibrate it. The calibration routine gets to 8% then the dash lights flicker and the test fails.

I read all the posts I can find on this issue but nothing that pertains directly to the Ford Edge. Does anyone know how I can get the guidelines back?
Posts: 1
Joined: Tue Aug 22, 2017 8:29 pm
Vehicle: 2012 Ford Edge

Re: 2012 Ford Edge - Rear Camera - No Guidelines

Postby adsm08 » Wed Sep 13, 2017 6:35 pm

Do a soft reset of both the BCM and PAM, by simply clearing all codes. Then hook your battery, tap the cables together a few times, or hook them together through a bulb using a set of test leads, and then leave the battery disconnected for a minimum of two minutes. Reconnect battery and attempt the camera calibration again.
Posts: 2
Joined: Tue Sep 12, 2017 2:01 am
Vehicle: Ranger, 4.0, 1987

Return to General and Support forum

Who is online

Users browsing this forum: No registered users and 5 guests