EL Falcon (Australia) Connection.

Discussion about adapters and connections - usage, problems, solutions

EL Falcon (Australia) Connection.

Postby jas24zzk » Sat Aug 12, 2017 3:06 pm

Hi guys,

I have a 1997 EL 5.0 that is a donor for a bigger project. At this point in time the car is a runner, albeit with 2 obvious faults. I've done a little bit of research, and believe i have worked out the problem.....gotta fix before I pull the car apart.

I could do the old flash me the code thing, this would get me past this hurdle, but going forward I will need to be able to scan the systems from time to time.

From what i can see, is that the EL runs SCP, which forscan can read, but it runs a non OBD2 diagnostics port.

My question, is can I simply make a breakout cable to allow me to connect my ELM327 adapater and my laptop?

Cheers
Jas
jas24zzk
 
Posts: 1
Joined: Mon Aug 07, 2017 11:16 am
Vehicle: GQ Patrol, 5.0 Windsor

Re: EL Falcon (Australia) Connection.

Postby KRL-94 » Sat Sep 30, 2017 11:27 am

I'm unsure if that would work. is there a cable available that you can use to connect the obd plug to your computer??
KRL-94
 
Posts: 14
Joined: Sun May 21, 2017 10:23 am
Vehicle: 2004 ford falcon 4L inline 6 cyl

Re: EL Falcon (Australia) Connection.

Postby Falcs » Fri Dec 01, 2017 11:01 am

Did you end up getting this to work?
Falcs
 
Posts: 1
Joined: Wed Aug 03, 2016 7:52 am
Vehicle: Falcon, I6 SOHC, 4L, 164kw, 1998


Return to Adapters & Connection

Who is online

Users browsing this forum: No registered users and 3 guests